An electric nail file bit, made of Tungsten Carbide, with a conical shape and a cross-cut geometry. This model is designed for professional use and developed for efficient and quick removal of artificial material during intensive salon work.
The cross-cutting channels provide aggressive but controlled material removal, breaking it down evenly and preventing slipping on the surface. This allows for higher working speed and stable performance even with hard and dense systems such as acrylic, hard gel, and polygel.
The bit has a diameter of 6 mm and a working part length of 15.5 mm, making it suitable for bulk removal, thickness reduction, and corrections. The shape provides good control over the working area and even load distribution along the entire length of the cutting part.
This model is designed only for the right hand and is used with standard clockwise rotation. The cutting geometry is optimized for stable and predictable work, requiring professional experience and properly selected speeds.
Recommended operating speeds are between 15,000 and 25,000 revolutions per minute, depending on the material and working technique. The bit is suitable for autoclave sterilization and chemical disinfection.
The model is designed for professional use and allows for an individual approach depending on the working technique, speeds, and type of material.
